Team development: Definition, measurement and relationships with team effectiveness

This article describes the development and validation of a theory-based measure of team development. Drawing on three independent samples, including multisource and two-wave data, we found support for the scale’s theoretical multidimensionality. Convergent and discriminant validity was established, and criterion-related validity was determined through the scale’s relation with three facets of team effectiveness: viability, extra-role performance and reputation. We conclude that the 29-item measure is valid and reliable for the assessment of team development. Theoretically, we shed light on the dimensionality of team development and extend the available knowledge on its nomological network. Practical implications for enhancing team effectiveness via team development are discussed

The effect of inventory leanness on firms’ credit ratings: the case of Pakistan

Artigo publicado em revista científica internacionalInventory leanness requires that firms minimize inventory mistreatment and misuse. A firm performance deteriorates because of high inventory misuse, and because of such an issue, the effect on the firm’s credit rating can also be seen. This study examines the effect of inventory leanness on firms’ credit ratings. It aims to create an understanding of the relationship between inventory leanness and the firm’s financial performance and provides insight into the credit rating system of Pakistan. We analyze secondary Pakistan data between 2008 and 2017. Among the sixty firms on Pakistan Stock Exchange that are rated by PACRA, only thirty-eight have complete data available on their respective websites. By using panel data analysis, the results indicate that inventory leanness and credit ratings are positively related. In an added analysis, we evaluate the financial performance in the context of credit rating by using control variables (size, leverage, and capital intensity ratio) and dummy variables (loss and subordinate debt). Our results are consistent with earlier studies.info:eu-repo/semantics/publishedVersio

Ready-to-Fabricate RF Circuit Synthesis Using a Layout- and Variability-Aware Optimization-Based Methodology

In this paper, physical implementations and measurement results are presented for several Voltage Controlled Oscillators that were designed using a fully-automated, layout- and variability-aware optimization-based methodology. The methodology uses a highly accurate model, based on machine-learning techniques, to characterize inductors, and a multi-objective optimization algorithm to achieve a Pareto-optimal front containing optimal circuit designs offering different performance trade-offs. The final outcome of the proposed methodology is a set of design solutions (with their GDSII description available and ready-to-fabricate) that need no further designer intervention. Two key elements of the proposed methodology are the use of an optimization algorithm linked to an off-the-shelf simulator and an inductor model that yield EM-like accuracy but with much shorter evaluation times. Furthermore, the methodology guarantees the same high level of robustness against layout parasitics and variability that an expert designer would achieve with the verification tools at his/her disposal. The methodology is technology-independent and can be used for the design of radio frequency circuits. The results are validated with experimental measurements on a physical prototype

Search for events with large missing transverse momentum, jets, and at least two tau leptons in 7 TeV proton–proton collision data with the ATLAS detector

A search for events with large missing transverse momentum, jets, and at least two tau leptons has been performed using 2 fb^-1 of proton-proton collision data at sqrt(s) = 7 TeV recorded with the ATLAS detector at the Large Hadron Collider. No excess above the Standard Model background expectation is observed and a 95% CL visible cross section upper limit for new phenomena is set. A 95% CL lower limit of 32 TeV is set on the GMSB breaking scale Lambda independent of tan(beta). These limits provide the most stringent tests to date in a large part of the considered parameter space.Peer Reviewe

Search for pair production of a heavy up-type quark decaying to a W boson and a b quark in the lepton+jets channel with the ATLAS detector

A search is presented for production of a heavy up-type quark (t') together with its antiparticle, assuming subsequent decay to a W boson and a b quark, t't'bar -> W+b W-bbar. The search is based on 1.04 fb^-1 of proton-proton collisions at sqrt(s) = 7 TeV collected by the ATLAS detector at the CERN Large Hadron Collider. Data are analyzed in the lepton+jets final state, characterized by a high transverse momentum isolated electron or muon, high missing transverse momentum and at least three jets. No significant excess of events above the background expectation is observed. A 95% C.L. lower limit is set at m(t') > 404 GeV.Peer Reviewe

Search for extra dimensions using diphoton events in 7 TeV proton–proton collisions with the ATLAS detector

Using data recorded in 2011 with the ATLAS detector at the Large Hadron Collider, a search for evidence of extra spatial dimensions has been performed through an analysis of the diphoton final state. The analysis uses data corresponding to an integrated luminosity of 2.12 fb^-1 of sqrt(s) = 7 TeV proton-proton collisions. The diphoton invariant mass spectrum is observed to be in good agreement with the expected Standard Model background. In the large extra dimension scenario of Arkani-Hamed, Dimopoulos and Dvali, the results provide 95% CL lower limits on the fundamental Planck scale between 2.27 and 3.53 TeV, depending on the number of extra dimensions and the theoretical formalism used. The results also set 95% CL lower limits on the lightest Randall-Sundrum graviton mass of between 0.79 and 1.85 TeV, for values of the dimensionless coupling k/\bar{M}_{Pl} varying from 0.01 to 0.1. Combining with previously published ATLAS results from the dielectron and dimuon final states, the 95% CL lower limit on the Randall-Sundrum graviton mass for k/\bar{M}_{Pl} = 0.01 (0.1) is 0.80 (1.95) TeV.Peer Reviewe

Searches for supersymmetry with the ATLAS detector using final states with two leptons and missing transverse momentum in s=7\sqrt{s}=7 TeV proton-proton collisions

Results of three searches are presented for the production of supersymmetric particles decaying into final states with missing transverse momentum and exactly two isolated leptons, e or mu. The analysis uses a data sample collected during the first half of 2011 that corresponds to a total integrated luminosity of 1 fb^-1 of sqrt{s} = 7 TeV proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider. Opposite-sign and same-sign dilepton events are separately studied, with no deviations from the Standard Model expectation observed. Additionally, in opposite- sign events, a search is made for an excess of same-flavour over different-flavour lepton pairs. Effective production cross sections in excess of 9.9 fb for opposite-sign events containing supersymmetric particles with missing transverse momentum greater than 250 GeV are excluded at 95% CL. For same-sign events containing supersymmetric particles with missing transverse momentum greater than 100 GeV, effective production cross sections in excess of 14.8 fb are excluded at 95% CL. The latter limit is interpreted in a simplified weak gaugino production model excluding chargino masses up to 200 GeV.Peer Reviewe

Jet energy measurement with the ATLAS detector in proton-proton collisions at s=7\sqrt{s}=7 TeV

The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of sqrt(s) = 7 TeV corresponding to an integrated luminosity of 38 inverse pb. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0.4 or R=0.6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pt > 20 GeV and pseudorapidities eta 50 GeV after a dedicated correction for this effect. The JES is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pt, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pt jets recoiling against a high-pt jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, providing an improved jet energy resolution and a reduced flavour dependence of the jet response. The JES systematic uncertainty determined from a combination of in situ techniques are consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pt jets.Peer Reviewe

Measurement of D∗+/−D^{*+/-} meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Peer Reviewe